1/14/2024 0 Comments Ikea kallax shelf with back![]() ![]() Utility plywood is very very thin (so, it’s cheap and light in weight), and it’s perfect for backing. The IKEA Kallax shelf is open from the front and back, so to close in the back as well you can also use utility plywood like I did on my first IKEA Kallax hack. 1/4″ plywood will also be a much sturdier door. I recommend using 1/4″ Plywood for the centers instead, the utility plywood is very thin and bends easily which made it very difficult to get in the center of my boards, but I was using what I had leftover on hand. To build these doors I used 1×4 select pine boards and utility plywood. ![]() The next step was to cut the wood for the two doors in front. On this Makeover I also removed one of my divider shelves to get a longer shelf and filled it with backer rod and wood filler (see photo above). Guys, I know these first steps can be tedious, but if you’re painting IKEA furniture do NOT skip sanding and priming, ok? It’s absolutely necessary for a final paint coat that will last. I did two coats of primer to be safe and to make sure my paint sticks to the shelf. Primer is also a very strong chemical and you need to make sure you use gloves and a face mask when doing this step. I will say, the KILZ primer was also not as strong smelling as the Zinsser primer. I applied it with a paintbrush and foam roller, for a smoother finish than a regular roller. Both work great on IKEA furniture, but KILZ is the more cost friendly option. I recommend using that, or this Zinsser Primer. ![]() I used KILZ 2 All Purpose Primer for this makeover. Liquid Sandpaper is a chemical so if you go this route make sure to use proper precautions as stated on the bottle. I used this method on my first IKEA Kallax Shelf Hack and it turned out great! Liquid sandpaper is a chemical that basically strips the top shiny layer off of the furniture and creates a “texture” similar to what sandpaper does, and this gives the primer something to stick to. I used my orbital sander with 220 grit sandpaper.Īnother option is to use liquid sandpaper. The whole shelf needs to be sanded before any primer or paint will stick to it. So let’s get into it! How to sand and prep IKEA furniture for paint It’s super easy, and if I can do it, so can you. This sounds like a lot but don’t get too intimidated. Step By Step Instructions For This IKEA Kallax Cabinet Hack Materials you will need for this iKEA kallax cabinet hack ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |